How to Flush Mobile Toilets in Jiangsu
There are four main flushing methods for mobile toilets in Jiangsu: high-pressure air-water flushing, foam flushing, foot-pedal flushing, and water flushing.
High-pressure air-water flushing: This method utilizes the combined action of high-pressure water flow and gas to flush the inner walls of the toilet bowl. Its advantages lie in its high flushing pressure and wide flushing range. It can clean the toilet bowl with only one-fifth of the normal water volume, greatly conserving water resources. In terms of control, it is achieved through the collaboration of an infrared sensor and a computerized intelligent system. When the user finishes using the toilet, the infrared sensor detects the departure of the human body and transmits the signal to the computerized intelligent system, which then activates the high-pressure air-water flushing device to ensure timely and effective flushing after each use, maintaining the cleanliness and hygiene of the toilet.
Foam flushing: An automatic foaming machine is installed in the equipment room, which continuously operates to cover the surface of the toilet bowl with a layer of snow-white foam. The uniqueness of this process lies in the use of foam generated by a mixed liquid to replace the conventional flushing method. The foam not only cleans the toilet bowl but also effectively blocks the emission of odors, keeping the interior of the mobile toilet relatively fresh. At the same time, compared to traditional flushing methods, foam flushing significantly conserves water resources, aligning with the concept of environmental protection and energy conservation.
Foot-pedal flushing: Some mobile简易 (simple) toilets are equipped with a foot-pedal device. When the user finishes using the toilet, they simply need to step on the black ball located near the squatting pit, and the squatting pit will automatically flush. This design is simple and practical, eliminating the need for the user to operate it with their hands and avoiding the risk of cross-infection. It is particularly suitable for places with high hygiene requirements, such as public event venues and construction sites.
Water flushing: This is a relatively common flushing method. A water tank is installed inside the mobile toilet. After the user finishes using the toilet, by pressing the flush button or pulling the handle, the water in the tank flows through the pipes to the toilet bowl for flushing. This method is straightforward and easy to understand, meeting basic flushing needs.
