Inner Mongolia Container House Customization

Inner Mongolia offers customized container house services, which can be individually designed and installed according to needs, covering multiple locations such as Baotou, Hohhot, and Ordos.

I. Material and Structural Design

Container houses in Inner Mongolia use high-strength weather-resistant steel (such as Q355B grade) as the main frame, with a yield strength approximately 30% higher than that of ordinary carbon steel. A self-balancing system is formed through rigid connections between corner fittings and side beams, reducing material usage by about 15%. The enclosure structure adopts a three-layer composite construction of "rock wool-air layer-aluminum-zinc coated steel plate", with a thermal conductivity lower than 0.040 W/(m·K) and a heat transfer coefficient (U-value) lower than 0.5 W/(m²·K), effectively coping with the low-temperature environment in winter in Inner Mongolia, reducing condensation risks, and extending the service life of the steel structure.

II. Functionality and Adaptability

In response to the seismic fortification intensity of 7 degrees in Inner Mongolia, container houses introduce a dual-fixing mode of "wedge-shaped lock + high-strength bolt" at the box connections. In shaking table tests simulating rare earthquakes of magnitude 8, the displacement is controlled within 3 millimeters, which is about 40% better in deformation amplitude than conventional welded joints. Additionally, the house surface coating system uses a combination of "epoxy zinc-rich primer + polyurethane topcoat", which has not shown red rust after 1000 hours of salt spray tests, equivalent to a 15-year protection cycle in coastal or industrial pollution environments, adapting to the wind and sand erosion environment in Inner Mongolia.

III. Customized Services

The customized container house services in Inner Mongolia cover various types such as container houses, movable panel houses, and color-steel houses, supporting the design of functional partitions according to needs, such as integrating office, accommodation, kitchen, and bathroom modules. Some enterprises offer fully prefabricated production, with on-site installation requiring only lifting and joint treatment, reducing construction errors to the millimeter level. Meanwhile, the houses can be flexibly combined or stacked to adapt to different scenario needs, such as temporary housing on construction sites, mobile offices for field operations, and emergency disaster relief command centers.