Huli Park Mobile Toilet Installation

The installation of mobile toilets in Huli Park should follow a simple and efficient process, with specific steps adjusted according to the toilet type (split-type or integrated) and site conditions, while also emphasizing the provision of convenient facilities.

I. Pre-installation Preparations

1. Site Planning and Positioning

   • Determine the installation location of the mobile toilets based on the overall layout of the park and pedestrian flow distribution, prioritizing areas with solid ground and good drainage, avoiding low-lying areas prone to waterlogging or soft soil.
   • Reserve sufficient space for pedestrian passage and equipment maintenance, while considering coordination with the surrounding landscape.

2. Basic Condition Inspection

   • Ensure the ground is level. For split-type toilets, pour a concrete foundation or lay a moisture-proof layer in advance to enhance stability.
   • Confirm the positions of water, electricity, and sewage pipe interfaces. For integrated toilets, plan the lifting path in advance to avoid obstacles.

II. Installation Steps for Split-type Mobile Toilets

1. Chassis and Frame Positioning

   • Fix the prefabricated chassis at the predetermined position, connecting it to the ground with expansion bolts or welding, ensuring a levelness error of no more than 2mm.
   • Install the frame structure, secure it with high-strength bolts, and check for verticality and stability.

2. Wall and Roof Panel Installation

   • Assemble the wall modules in sequence, using sealing strips or special connectors to ensure airtightness and waterproofing.
   • When installing the roof panel, reserve an inspection port and reinforce the structure to withstand wind and rain loads.

3. Internal Facility Connection

   • Connect water supply and drainage pipes, using PVC or stainless steel materials to ensure no leakage; electrical wiring should be protected with conduits and grounded.
   • Install toilets, sinks, ventilation systems, and other equipment, adjusting water and air pressure to design parameters.

4. Function Inspection and Debugging

   • Test flushing, lighting, ventilation, and other functions, check for smooth sewage discharge, and adjust equipment parameters to optimal conditions.
   • Clean the site and post usage instructions and safety signs.

III. Key Points for Integrated Mobile Toilet Installation

1. Lifting and Positioning

   • Use a crane to lift the entire toilet to the designated position, adjusting the angle with a level to ensure even contact with the ground.
   • Secure the base, using chemical anchors or embedded parts to enhance wind resistance.

2. Pipe Connection

   • Quickly connect the water inlet, sewage, and electrical circuits, using flexible connectors to reduce vibration impact.
   • Test the stability of water and electricity supply to ensure no leakage or short-circuit risks.

IV. Provision of Convenient Facilities

The construction of public toilets in Huli District parks emphasizes humanized design. The following configurations can be considered when installing mobile toilets:

• Free Paper Dispensers: Install them at prominent entrances, using sensor-based dispensing to reduce waste.
• Plants and Fragrances: Place shade-tolerant plants inside and equip with simple fragrance machines to improve air quality.
• Barrier-free Facilities: Install ramps, handrails, and emergency call buttons to meet the needs of special groups.

Through standardized installation processes and detail optimization, mobile toilets in Huli Park can achieve rapid deployment and long-term stable operation, providing visitors with a convenient and comfortable restroom environment.