Customization of Mobile Toilets in Hubei

The customization of mobile toilets in Hubei requires selecting the appropriate type and paying attention to technical details based on specific needs, mainly including microbial, foam-flush, and other customization options.

Key Points for Customizing Microbial Mobile Toilets

Microbial mobile toilets decompose organic waste through specific microbial communities, achieving harmless treatment. When customizing, it is essential to focus on environmental parameters:

• Microbial strain ratio and dosage concentration: The proportion of microbial strains should be calculated based on the organic load of the target environment (such as foot traffic), temperature fluctuations (e.g., high temperatures in summer and low temperatures in winter in Hubei), and humidity changes (e.g., high humidity during the plum rain season) to ensure decomposition efficiency.
• Carrier material adaptation: The selection of porous ceramics, activated carbon, or synthetic fiber fillers should be combined with local water quality. For example, areas with high water hardness should avoid using carriers prone to scaling to maintain microbial community stability.
• Gas-liquid balance control: A "segmented aerobic system" is used to suppress odors, and intermittent aeration programs are set according to usage frequency. For example, high-traffic scenarios such as tourist attractions require shorter aeration intervals, while remote areas can extend the cycle to reduce energy consumption.

Key Points for Customizing Foam-Flush Mobile Toilets

Foam-flush toilets use foam instead of clean water for flushing, achieving a water-saving rate of over 90%. Customization requires adjusting technical parameters according to Hubei's climate:

• Optimization of foam-flush liquid formulation: In high-temperature and high-humidity environments in summer, the concentration of surfactants should be increased to enhance foam stability; in low-temperature conditions in winter, antifreeze components (such as ethylene glycol) should be added to prevent pipeline freezing.
• Collaborative design of system modules: The foam-flush liquid storage module should be equipped with an insulation layer, the pneumatic foam-flush module should use corrosion-resistant materials (such as stainless steel), and the control module should integrate a humidity sensor to automatically adjust the foam-flush frequency. For example, the foam-flush frequency can be increased during the plum rain season to prevent fecal exposure.
• Regional adaptability improvements: For low temperatures in winter in Hubei, electric tracing bands should be wrapped around the foam-flush liquid pipelines to ensure normal foam generation; at the same time, the system shell should adopt a double-layer structure to reduce heat loss.

Other Customization Options

• Flexible adjustment of basic parameters: The material can be selected from stainless steel (corrosion-resistant) or fiberglass (lightweight), and the specifications can be designed according to the usage scenario (e.g., single toilet cubicle dimensions ≥ 1.1m × 1.4m). The applicable temperature range can be extended from -20°C to 50°C, and the voltage can support 220V or 380V.
• Full-process service support: Personalized services from site survey and scheme design to installation and commissioning are provided, covering scenarios such as urban management (e.g., public toilet upgrades), commercial activities (e.g., temporary toilets for music festivals), and livelihood projects (e.g., post-disaster reconstruction).
• Comprehensive supporting policies: Support for installment payments and third-party logistics delivery is provided, along with free maintenance services within a one-year warranty period. The return and exchange policy is clear (e.g., no-reason return within 7 days), and value-added tax invoices can be issued according to customer needs.