Huadu Mobile Toilet Usage Guide

The usage guide for Huadu mobile toilets varies depending on the type. Here are the common types and their usage methods:

Standalone Mobile Toilet

1. Installation and Connection: Place the toilet in a stable position and push open the bottom wheel locks to secure it. Connect one end of the sewage hose to the toilet's sewage outlet and the other end to a floor drain or a temporary sewage bucket. Connect the water inlet pipe to a clean water source and open the valve to fill with water. Plug in the power cord to ensure a stable power supply and check that all connections are sealed and leak-free.
2. Function Operation: Press the power switch on the control panel to start the system. The indicator light will turn on, indicating standby mode. After using the toilet, press the flush button (marked with a water droplet icon). The built-in water pump will draw water to flush the toilet bowl. Some models have a dual-flush function, with a small amount of water for urination and a large amount for defecation. Models with heated seats allow you to adjust the seat temperature. The deodorization function generally operates automatically but can also be activated manually.
3. Maintenance and Cleaning: When the sewage tank is nearly full (indicated by a full-level alarm), turn off the power first, then pull out the sewage hose. Drag out the sewage tank horizontally to avoid tilting and leakage. Pour the sewage into a designated location and rinse the inside of the tank with clean water. Disinfect it monthly with a special cleaner and clean any fiber residues around the shredding blades. It is recommended to clean the freshwater tank weekly to prevent algae growth and clogging of the water pipes. Avoid throwing in anything other than toilet paper during use. In cold environments, take anti-freeze measures as water temperatures below 0℃ may damage the water pump. Before long-term storage, empty all tanks and keep the lids open for ventilation and drying. If the toilet fails to flush, first check the water level in the freshwater tank and the power connection, then check if the sewage hose is bent or blocked.

Floor-mounted Mobile Squat Toilet

1. Installation: Place the base on the bathroom floor and adjust it according to any unevenness. Connect the toilet to the floor drain tightly as per the instructions, then connect the water tank to the toilet body and turn on the water supply.
2. Pre-use Preparation: Rinse the inside of the squat toilet thoroughly before use to ensure hygiene.
3. Usage Process: Open the toilet lid, stand in front of the squat toilet, hold the lid with both hands, lean forward, bend your knees, and place your feet on the protrusions on both sides of the toilet. Lower your center of gravity and squat on the toilet to defecate. After use, close the lid and press the flush button to rinse clean.
4. Precautions: Pay attention to the flatness and stability of the floor during installation to avoid shaking or water leakage. Clean it promptly and thoroughly. Maintain balance and stability during use to avoid slipping and falling. It is best to clean the inside before use. Suspend use if you feel unwell.

Mobile Simple Toilet

1. Flushing the Toilet: There are two black balls inside the toilet. After using the toilet, step on one of them, and the squat toilet will flush automatically.
2. Washing Hands: Step on the other black ball, and the faucet will release water for hand washing.
3. Using the Door Bolt: The toilet door has a bolt. Pull the bolt up to indicate that someone is inside, and pull it down to indicate that it is unoccupied.