How to Make Prefabricated House Panels Look Good

To make prefabricated house panels look good, you can start with ceiling and wall decoration. Here are the specific methods:

Ceiling Decoration

• Skeleton Construction: When decorating the ceiling of a hollow prefabricated panel floor, first draw a horizontal line around the walls. Fix wooden beams horizontally on the walls and then connect and secure them with wooden strips on the walls. Next, drill holes in the middle between the fixed wooden beams and the two hollow prefabricated panel floors, assemble the skeleton, and seal the ceiling panels. This method ensures the flatness and stability of the ceiling, laying a foundation for subsequent aesthetic design.
• Keel Selection: When both wooden keels and light - steel keels are available, give priority to light - steel keels. Light - steel keels have the advantages of high strength and resistance to deformation, which can reduce the deformation of the ceiling structure and ensure the long - term aesthetic effect of the ceiling.
• Joint Treatment: When making the ceiling, leave a certain amount of expansion space at each joint to prevent stress accumulation. Since prefabricated panels may undergo slight changes due to factors such as temperature and humidity, leaving expansion space can avoid problems such as cracks in the ceiling that affect aesthetics. At the same time, the installed keels should be kept flat, and the spacing should be set according to the specifications to ensure the overall flatness of the ceiling.
• Shape Selection: For houses with high spaces, you can choose ceiling forms such as gypsum sound - absorbing panels and plywood shapes. Gypsum sound - absorbing panels not only have good aesthetics but also have a certain sound - insulation effect; plywood shapes can be designed into various unique shapes according to personal preferences, adding a sense of hierarchy and artistry to the space.

Wall Decoration

As more and more developers use spliced prefabricated panels, new requirements are put forward for each process link. It is strictly prohibited to cut horizontal grooves in the water and electricity work because prefabricated panels are hollow and the groove depth is 5 cm. Cutting horizontal grooves may damage the structural stability of the prefabricated panels, affecting the overall aesthetics and safety of the walls. If water and electricity renovation is required, try to use the method of vertical grooving and operate strictly in accordance with the specifications to ensure the quality and aesthetics of wall decoration.