How to Install Lights in Container Houses

The installation of lights in container houses requires selecting appropriate methods based on the type of light fixture. Here are the common installation steps and key points:

Pre-installation Preparation

• Tool and Material Preparation: Prepare tools such as an electric drill, screwdriver, insulating tape, expansion screws, and wood screws according to the type of light fixture. For example, installing a chandelier requires drilling holes with an electric drill, while installing a ceiling light may involve using wood screws to secure it to pre-embedded wooden blocks.
• Inspection of Light Fixtures and Accessories: Ensure that the light fixtures and accessories are complete, without mechanical damage, deformation, paint peeling, or broken lampshades. Also, check that the construction drawings and technical documents are complete, the roof and floor construction are finished without leakage, the ceiling and wall plastering and floor cleaning are completed, the embedded parts and reserved holes meet the design requirements, and the relevant wiring is in place and has been inspected.

Installation Methods for Different Light Fixtures

• Ceiling Lights: Thread the connecting wire through the outlet hole of the plastic (wooden) base. Press the plastic (wooden) base tightly against the building surface, align its mounting holes with the screw holes of the lamp holder box, and secure it firmly with machine screws. If the diameter of the lamp base exceeds 100 millimeters, two screws must be used.
• Chandeliers: First, mark the position on the ceiling with a marker pen. Determine the drilling position according to the weight of the light fixture, with a height of 1.5 - 1.7 meters from the floor to the eyes being appropriate. After drilling holes with an electric drill, screw in the expansion screws, then fix the chandelier base to the expansion screws and tighten them with a wrench. Connect the power cords, with the live wire connected to L, the neutral wire to N, and the ground wire to E. After connection, wrap the joints with insulating tape.
• Wall Sconces: Choose whether to use a base plate according to the structure of the base. If using a base plate, fix the base plate first, and then fix the wall sconce to the base plate. The wall sconce base usually requires at least two screws. The installation height is generally 2 - 2.2 meters from the center of the light fixture to the floor, and for wall sconces installed at the bedside, 1.2 - 1.4 meters is appropriate.

Post-installation Inspection

• Power-on Test: After installation, turn on the power to test if it is powered on and check if the light fixtures work normally.
• Stability Inspection: Check if the light fixtures are installed firmly and without looseness to ensure safety during use.