How to Install a Container House on a Trailer
Installing a container house on a trailer requires selecting the appropriate method based on the type of house. Common methods include pre-embedding the trailer for fixation, using a transport frame for loading, and installing the foldable type on the ground before lifting it as a whole.
Pre-embedding the trailer for fixation: For some fixed-installation container houses, such as the installation of Zhongnan Steel Structure container mobile homes, the trailer is first embedded and fixed to the foundation using expansion screws. This method ensures a stable connection between the trailer and the foundation, providing a solid base for the subsequent installation of the container house. It prevents structural safety issues and ensures a good user experience by eliminating problems such as trailer wobbling during long-term use.
Using a transport frame for loading: Similar to the method used for loading new energy vehicles into containers, a car transport frame can be used. If multiple container houses need to be loaded into a large transport vehicle, the loading method for cars in containers can be referred to. First, place the container house on the transport frame. Use straps to secure the fixed parts of the house to the fixtures on the transport frame, ensuring a firm fixation. The straps should be positioned as close as possible to the center of the width of the fixed parts of the house. Then, push the transport frame and the house as a whole into the transport vehicle. Adjust the support rods of the transport frame to ensure that the frames are tightly pressed against each other and against the transport vehicle, preventing movement. Finally, on both sides of the transport frame, use straps to tighten and fix it to the rope rings at the bottom of the transport vehicle, preventing jumping.
Installing the foldable type on the ground before lifting it as a whole: For foldable container mobile homes, first install them on the ground. Check the stability of the steel wire ropes, lift the main frame steadily, and place support rods in the middle of the box to maintain stability. Then, push the walls open and tighten them with fastening screws. After installation is complete, use a crane to lift the folded container house to the predetermined installation location. Ensure that there are no people around before lowering it.
