How to Fold a Mobile Toilet Tent

There are mainly two methods for folding a mobile toilet tent, and you can choose one according to the actual situation:

Method 1: Step-by-Step Folding Method

1. Cleaning
   Mix a small amount of laundry detergent with clean water and use a damp cloth to wipe the surface of the tent, removing dust or stains. This step can prevent stains from solidifying after folding and extend the service life of the tent. Note that the dampness of the cloth should be moderate to prevent moisture from seeping into the internal structure of the tent.

2. Folding the Poles
   Fold the two top support poles inward so that they are parallel and flush with each other; then fold the two bottom poles in the same way. When operating, gently press the joints of the poles to ensure smooth folding and avoid forced bending that may cause deformation or breakage of the poles.

3. Standing and Secondary Folding
   Stand the tent upright as a whole and fold the top poles towards the back of your hand. At this time, the tent will naturally sag due to gravity, forming a preliminary contracted state. Keep the tent vertical to prevent tilting and misalignment during folding.

4. Closing and Sealing
   Bring the two halves of the tent together towards the middle so that the fabrics on both sides are completely flush. Finally, press the tent firmly to expel the internal air, then put it into the matching storage bag and tighten the bag opening to seal it. Make sure the tent is completely dry in this step to prevent mildew caused by moisture.

Method 2: Overlapping Storage Method

1. Initial Overlapping
   Fold the tent along the central axis so that the fabrics on both sides overlap. When folding, align the edges of the tent to avoid misalignment that may cause difficulties in storage.

2. Adjusting the Bottom Orientation
   Rotate the folded tent 180 degrees so that the wider bottom side faces the operator. This design facilitates the use of the bottom structure to fix the shape of the tent during subsequent storage.

3. Rolling and Storing
   Starting from the top of the tent, slowly roll the tent along the folding line while expelling the internal air. When rolling to the bottom, use the wide bottom edge to fix the shape of the roll and finally put it into the storage bag. This method is suitable for scenarios with limited space, but note that the rolling pressure should be even to prevent fabric wrinkles.

Precautions:

• Before folding, make sure the tent is completely dry to prevent metal parts from rusting or the fabric from mildewing in a humid environment.
• Avoid using sharp tools to touch the surface of the tent during operation to prevent scratching the waterproof coating.
• If the tent has not been used for a long time, it is recommended to unfold it regularly for ventilation to prevent material aging.