How to Flush Mobile Toilets in Tianzhu Mountain
The flushing method for mobile toilets in Tianzhu Mountain depends on the specific type, with common methods and operating instructions as follows:
1. High-Pressure Air-Water Flush Type
This type of toilet achieves efficient flushing through a mixture of high-pressure water flow and gas, with core operation relying on infrared sensors and an intelligent system. After the user leaves, the infrared sensor detects the departure signal and triggers the computerized intelligent system to activate the high-pressure flushing device. At this point, compressed gas propels water from the tank at high speed, creating a powerful water flow that covers the inner walls of the toilet bowl, achieving cleanliness with only one-fifth of the normal water volume. Users do not need to operate manually, as the entire process is automatically completed by the system. However, care should be taken to avoid obstructing the infrared sensor to prevent interference with flush triggering.
2. Foam Flush Type
This type of toilet generates foam through an automatic foaming machine to cover the surface of the toilet bowl, using foam instead of traditional flushing. The foaming machine in the equipment room operates continuously, mixing foaming solution with water and pumping it into the toilet bowl to form a layer of snow-white foam. The foam not only lubricates the inner walls of the toilet bowl, reducing the adhesion of waste, but also effectively blocks the emission of odors. There is no need for immediate flushing after use, as the foam maintains cleanliness until the system automatically replenishes the foam before the next use. If the foam level is insufficient, check whether the foaming solution storage tank in the equipment room needs to be refilled with specialized foaming solution.
3. Water Tank with Gravity Flush Type
This type of toilet relies on the gravity of an elevated water tank for flushing, with operating instructions similar to those of a traditional toilet. The water tank is typically installed at the top of the restroom and connected to the toilet bowl via a water pipe. When flushing, the user needs to manually pull the flush handle (or press the button) on the side of the water tank, at which point the piston inside the tank opens, allowing water to flow rapidly into the toilet bowl under gravity, creating flushing force. After flushing is complete, the float ball inside the tank automatically opens the inlet valve as the water level drops, replenishing the water volume to the set position. Regular checks of the water tank level and inlet valve are necessary to prevent flushing failure due to water shortage.
4. Foot-Pedal Flush Type
Some simple mobile toilets adopt a foot-pedal mechanical flushing design, with the operating part being the black sphere at the bottom. Two black rubber spheres are usually installed beneath the toilet bowl, one of which serves as the flush control valve. After use, the user needs to step on the designated black sphere with their foot (some toilets may have markings indicating which one), at which point the mechanical device inside the sphere opens the flushing pipe, allowing water to enter the toilet bowl and complete flushing. The stepping force should be moderate, as too light a step may result in insufficient flushing, while too heavy a step may damage the sphere structure.
Summary: Mobile toilets in Tianzhu Mountain have diverse flushing methods, and users should choose the corresponding operation based on the toilet type. If the type cannot be determined, observe the internal markings of the toilet or consult the management personnel to avoid equipment failure due to misoperation.
