Homemade Mobile Toilet
Homemade mobile toilets can be realized in various ways, with common examples involving the use of water storage barrels or tanks combined with other materials. Here are the specific methods:
Case 1: Making a Mobile Toilet Using a Water Storage Barrel This method focuses on the water storage barrel as the core component, achieving basic functionality through simple modifications. First, select a water storage barrel of an appropriate capacity as the main structure. Cut a rectangular opening on the side of the barrel as the entrance and place a portable toilet or a simple toilet seat inside. Wheels can be installed at the bottom of the barrel for easy mobility. Some designs incorporate a partition inside the barrel, with the upper layer for defecation and the lower layer for storing waste, preventing odor diffusion through sealed design. If a flushing function is required, a small water tank or a manual water pump can be added, connected to the toilet nozzle via a hose.
Case 2: Making a Solar-Powered Mobile Toilet Using a Water Storage Barrel Building on the basic water storage barrel toilet, a solar power supply system is added to enhance practicality. Specific steps include installing solar panels on top of the water storage barrel and connecting them to a battery for storing electrical energy. This energy is used to power small exhaust fans or lighting fixtures, improving the internal environment. Some designs integrate heating devices, providing warm water flushing through a solar water heating system. Additionally, the barrel can be wrapped with insulation material to adapt to low-temperature environments.
Case 3: Making a Multi-Functional Mobile Toilet Using a Water Storage Tank and a Pallet This solution combines a water storage tank, a pallet, and various tools to construct a more functional mobile toilet. The production steps are as follows:
- Bottom Structure: Fix wheels at the four corners of a plastic pallet to form a mobile base.
- Tank Modification: Remove the top of a recycled water storage tank to create an open tank. Stack two tanks and secure the outer frame with self-tapping screws, then cut an entrance.
- Drainage System: Drill a hole in the floor inside the tank, insert an elbow, and connect it to a water pipe. Seal it to form a drainage outlet. Align the toilet with the drainage outlet and secure it with glue.
- Water Supply System: Install a faucet inside the tank and connect it to a water pipe leading to the drainage outlet below. Drill a hole at the top to install a stainless steel basin as a sink, and seal the bottom with a pipe cap.
- Additional Features: Connect the water inlet pipe of the toilet tank, install a shower hose and bracket. Fix hinges on the tank frame, connect wooden boards to form a door, and install a door handle.
Precautions:
- Plan the functional requirements before production, such as whether flushing, lighting, or insulation is needed.
- Choose materials with good sealing properties to prevent odor leakage.
- Design the drainage system reasonably to avoid blockage or leakage.
- Regularly clean the waste in mobile toilets to maintain hygiene.
