Haikou Public Mobile Toilet Specifications

The specifications of public mobile toilets in Haikou vary significantly depending on the usage scenario and type. Common types and their specific parameters are as follows:

I. Specifications by Functional Type

1. Single Standard Type
   Approximately 1.2m × 1.5m × 2.0m (length × width × height), with compact internal space accommodating only one toilet cubicle. Suitable for temporary events or areas with low foot traffic, such as community gatherings and small exhibitions.

2. Double Standard Type
   Approximately 1.5m × 2.5m × 2.2m, equipped with two independent toilet cubicles, allowing simultaneous use by two people. Commonly found in scenic spots, construction sites, and other medium-traffic areas to meet short-term peak demands.

3. Luxury Type (with barrier-free facilities)
   Approximately 2.5m × 3.0m × 2.5m, in addition to standard toilet cubicles, it includes disabled access ramps, handrails, low-level sinks, and other facilities. The interior clear height is not less than 2.1 meters, suitable for high-end scenic spots, transportation hubs, and other public places with high barrier-free requirements.

4. Mobile Toilet Vehicle
   Relatively large in size, it can accommodate 4-6 toilet cubicles, equipped with flushing systems, lighting, ventilation equipment, and even air conditioning. Some models also include a management room, suitable for large-scale outdoor events (such as music festivals, marathons) or municipal emergency scenarios.

II. General Design Specifications

1. Transportation Restrictions
   The total width of the assembled toilet must not exceed the chassis width of the carrying vehicle, and the height of the box should not be greater than 2.5 meters. The total height during transportation (including the vehicle) must not exceed 4.0 meters to ensure compliance with road transportation regulations.

2. Toilet Cubicles and Internal Space

   • Standard toilet cubicle: length 1.00–1.50 meters, width 0.85–1.20 meters;
   • Urinal station (including urinal): depth 0.75 meters, width 0.70 meters;
   • Area of a single toilet cubicle: not less than 1.4 meters × 0.95 meters (length × width), with an interior clear height of not less than 2.0 meters or 2.1 meters.

3. Management Room and Aisles

   • Management room area: not less than 2.2 meters × 1.1 meters (length × width), used for storing cleaning tools or monitoring equipment;
   • Aisle width: for single-row toilet cubicles with outward-opening doors, the aisle should be 1.30 meters wide, with a minimum width of not less than 1.00 meters; for double-row toilet cubicles with outward-opening doors, the aisle should be 1.50–2.10 meters wide to ensure smooth passage of people.

III. Adaptation to Special Scenarios
Some products adopt a modular design, allowing multiple toilet cubicles and management rooms to be combined according to needs, with flexible length adjustments. For example, scenic spots may adopt a combination of '2 toilet cubicles + 1 management room', while construction sites may choose a configuration of '4 toilet cubicles + barrier-free toilet cubicle' to balance cost and practicality.