Gao'an Prefabricated Cement House Finished Product
Prefabricated cement house finished products are cement-structured houses that are pre-fabricated in factories using prefabricated concrete components or integral pouring techniques and then transported to the site for assembly. The following is an introduction from aspects such as performance, scope of application, core technologies, and price:
Excellent Performance: Prefabricated cement houses possess multiple excellent performance characteristics. In terms of structural safety, they have strong earthquake and pressure resistance capabilities, effectively withstanding earthquakes and external pressures. Regarding fire protection, they feature fire-resistant and flame-retardant properties, reducing fire risks. In terms of energy efficiency, they offer good thermal insulation, reducing energy consumption. In terms of environmental adaptability, they are windproof and moisture-proof, capable of handling different climatic conditions, and are also corrosion-resistant and weather-resistant, ensuring long-lasting durability. Additionally, construction and installation are rapid and efficient, with short project durations,不受季节、天气环境限制 (unrestricted by seasons and weather conditions, translated as: not limited by seasonal or weather conditions), allowing for year-round construction. The designed service life of the houses is over 50 years, or even up to 70 years, with simple maintenance. They also support overall relocation and secondary disassembly and reuse.
Wide Scope of Application: They can be used to create various types of buildings, such as office buildings, small hotels, staff dormitories, canteens and restaurants, private garages, factory gatehouses, and storage warehouses. They are widely applicable to various scenarios, including rural dilapidated house renovations, rural self-built housing, farm supporting housing, temporary office and accommodation housing on construction sites, and temporary engineering supporting housing.
Clear Core Technologies: They adopt a modular design, with standard component sizes commonly being 3m×6m (floor height ranging from 2.8 to 3.2 meters). The concrete grade is not lower than C30, ensuring the structural strength of the houses. The wall thickness is usually between 150 and 200mm, meeting requirements for thermal insulation and sound insulation. The配套防水处理 (supporting waterproof treatment, translated as: accompanying waterproofing measures) use polyurethane coatings or SBS membranes, effectively preventing house leakage.
Price Fluctuations: The current market prices fluctuate between 800 and 3000 yuan per square meter depending on the configuration. A basic 20㎡ single room costs approximately 16,000 yuan, while a furnished 60㎡ two-bedroom apartment can reach 150,000 yuan.
