How to Flush Mobile Toilets in Gansu
The flushing methods for mobile toilets in Gansu mainly include high-pressure air-water flushing, foam flushing, tank gravity flushing, and water-flushing and waterless-flushing suction types.
High-pressure air-water flushing: This flushing method utilizes high-pressure water flow and gas to clean the inner walls of the toilet bowl. Its advantages lie in its high flushing pressure and wide coverage. It can clean the toilet bowl with only one-fifth of the water used in conventional flushing, significantly conserving water resources. In terms of flushing control, it is jointly managed by an infrared sensor and a computerized intelligent system. When someone finishes using the toilet and leaves, the infrared sensor detects this change and sends a signal to the computerized intelligent system, which then controls the high-pressure air-water flushing device to initiate flushing. The entire process is highly automated and very convenient to use.
Foam flushing: An automatic foaming machine is installed in the equipment room, capable of producing a large amount of foam that covers the toilet bowl with a layer of snow-white foam. This technique cleverly uses foam generated by a mixture to replace conventional flushing, not only saving water resources but also effectively blocking the emission of odors, keeping the air inside the toilet fresh. Foam has certain lubricating and cleaning properties, which can reduce the adhesion of waste to the inner walls of the toilet bowl to some extent, facilitating subsequent cleaning.
Tank gravity flushing: The water tank is usually located above the restroom, equipped with a water pipe and a suspended water tank containing a piston. During flushing, the water in the tank flows rapidly into the toilet bowl through the water pipe under the force of gravity, generating a strong impact to flush away waste. After flushing, the tank automatically refills to ensure normal use for the next flush. For mobile toilets without a mains water supply, a water storage tank can be used for replenishment to ensure that the water tank always has sufficient water.
Water-flushing and waterless-flushing suction types: Water-flushing mobile toilets are equipped with a water tank inside and a sewage tank at the bottom. They use water from the tank to flush waste into the sewage tank. Waterless-flushing types, on the other hand, have no flushing device and directly collect waste into the sewage tank. However, the sewage tanks of these two types of mobile toilets have relatively small capacities and require timely suction; otherwise, normal use may be affected.
