Fukang Mobile Toilet Dimensions

The dimensions of mobile toilets in Fukang vary depending on their type and configuration, with common specification ranges as follows:

I. Common Dimensions Classified by User Capacity

1. Single-Person Mobile Toilets

   • The common specification is 1.2 meters (width) × 1.2 meters (length) × 2.2 meters (height). This size is suitable for scenarios with limited space or low foot traffic, such as temporary events and small construction sites, meeting the needs of single-person independent use.
   • Some suppliers offer standard single-pit mobile toilets with external dimensions ranging from 1.2 to 1.5 meters in length, 1.0 to 1.2 meters in width, and 2.2 to 2.5 meters in height. This design balances internal space and transportation convenience by adjusting the length and height.

2. Double-Person Mobile Toilets

   • The dimensions are approximately 2.4 meters (width) × 1.2 meters (length) × 2.2 meters (height). By expanding the width horizontally, it can accommodate two people simultaneously, suitable for medium-foot-traffic scenarios such as scenic spots and parks, improving usage efficiency.

3. Multi-Person Mobile Toilets

   • Suitable for high-foot-traffic scenarios (such as large events and transportation hubs), common dimensions are 3.6 meters (width) × 1.2 meters (length) × 2.2 meters or larger. Some suppliers support customization, allowing adjustments to the width or an increase in the number of pits according to actual needs, for example, achieving longer lengths through modular combinations.

II. Dimensions Classified by Structural Type

1. Packaged Mobile Toilets

   • Taking the model PTHB-A9 provided by Shanghai Pengtuo Environmental Protection Equipment Engineering Co., Ltd. as an example, the dimensions are 1100 × 1500 × 2650 millimeters. These toilets usually adopt an integrated design, equipped with a packaging device inside. The dimensions are affected by the equipment layout, with the height being slightly higher than ordinary types to accommodate the treatment system.

2. Two-Pit Combination Type

   • The length may reach 2.4 to 3.0 meters, with the width maintained at 1.0 to 1.2 meters. By connecting two single pits longitudinally, it enables simultaneous use by two people, suitable for scenarios with high space utilization requirements.

III. Suggestions for Dimension Selection

The dimensions of mobile toilets should be comprehensively determined based on factors such as the usage scenario, foot traffic, and transportation conditions. For example, for temporary events, lightweight single-person or double-person toilets can be preferred; for long-term fixed locations, multi-person or customized designs can be considered. The specific dimensions should be based on the model parameters provided by the supplier, and the space limitations of the installation site should be confirmed in advance.