Foreigner-Made Mobile Toilet (Translated from Chinese Example)

No information was found on 'foreigner-made mobile toilets', but there is a case of a Chinese young man making a mobile toilet, detailed as follows:

Making a Mobile Toilet Using a Water Storage Tank and a Pallet

1. Basic Frame Construction: First, fix universal wheels at the four corners of the pallet bottom to facilitate movement. Place a water storage tank retrieved from a garbage station, which serves as the main structural part of the toilet.
2. Tank Modification: Use an angle grinder to cut the water storage tank along the top marked line to form an open-top tank. Invert another open-top water storage tank and stack it on the first one, securing the outer frame with self-tapping screws to increase space height and stability.
3. Doorway Construction: Cut out a rectangular opening to form a doorway for easy access.
4. Internal Facility Installation: Drill a hole in the internal floor, insert an elbow, connect a water pipe, and seal it. Install a toilet and secure it. Fix water pipes on the wall with clips, install a faucet, connect a pipe cap and water pipe below to create a drainage outlet. Install a stainless steel basin as a sink, connect it to the toilet water tank and shower hose, install a shower bracket, toilet seat, and spray-type showerhead.
5. Door Construction: Make a door for the toilet using wooden boards and hinges, and install a door handle to ensure privacy.

Making a Mobile Toilet Using a Water Storage Barrel

1. Water Storage Barrel Division: Use an angle grinder to split the water storage barrel in half to serve as the basic structure of the toilet.
2. Mobile Frame Construction: Fix universal wheels at the four corners of a wooden board for easy movement. Secure wooden strips to the top of the barrel with self-tapping screws to increase height and provide space for subsequent facility installation.
3. Doorway and Wall Construction: Cut an opening on the side of the barrel to form a doorway, install sponge strips to build a door frame, and embed plastic soft boards to form raised walls. Place the upper half of the barrel on top of the wooden strips to form a roof, and apply white waterproof paint for waterproofing and aesthetics.
4. Internal Facility Installation: Make a simple door using foam strips and honeycomb wooden boards. Drill a hole in the bottom of the barrel to install a drainage pipe as a floor drain, drill a hole on the side to connect a direct joint, and place a plastic bucket to form a small water storage device. Connect a water pipe-made bath heater, install a three-way joint below the inlet pipe and connect a showerhead, place a toilet, install a water tank and secure it with glass glue, connect the drainage pipe to a sewage bucket, and extend a water pipe horizontally from the three-way joint of the outlet pipe to the doorway as the inlet pipe for the sink.