Family Portable Indoor Toilet

You can refer to the following two common construction ideas to build a family portable indoor toilet:

Construction Using a Water Storage Tank and a Pallet

• Material Preparation: You need to prepare a water storage tank of an appropriate size. Its capacity can be selected according to the actual number of users and frequency of use. Generally, it is recommended to choose a tank with a capacity of around 50 - 100 liters to meet basic daily needs. You also need a sturdy pallet whose size should be able to firmly place the water storage tank and bear a certain weight. Additionally, four universal wheels should be of good quality and have strong load-bearing capacity to ensure stability during movement. Moreover, some fixing tools such as screws, nuts, and wrenches are required.
• Construction Steps: First, place the pallet on a flat ground and put the water storage tank steadily on it. Adjust the position to ensure the tank is placed firmly. Then, use tools to drill holes at the four corners of the bottom of the pallet. The size of the holes should match the installation components of the universal wheels. Next, fix the installation components of the universal wheels to the four holes at the bottom of the pallet using screws and nuts. Be sure to tighten the screws to ensure the universal wheels are firmly installed. Finally, check the stability and mobility of the entire device to ensure the universal wheels rotate flexibly and the water storage tank does not shake on the pallet.

Construction Using a Water Storage Bucket (The specific method is not mentioned in the reference information, and the following is a reasonable speculation and supplement)

• Material Preparation: A relatively large water storage bucket is used as the main container. You can choose a plastic one, which is lightweight and durable. A cover plate that fits the size of the mouth of the water storage bucket is used to seal the bucket and prevent odor from spreading. A toilet seat cushion is used to improve comfort during use. Some sealing strips are used to enhance the sealing between the cover plate and the water storage bucket. And some connecting components such as hinges are used for installing the cover plate.
• Construction Steps: First, clean the water storage bucket to ensure it is clean and odor-free inside. Then, paste the sealing strips on the edge of the mouth of the water storage bucket. Install the cover plate on the mouth of the water storage bucket using connecting components such as hinges to ensure the cover plate can open and close flexibly and has a good seal with the mouth of the water storage bucket. Finally, fix the toilet seat cushion on the cover plate, and a simple portable indoor toilet made using a water storage bucket is completed. When in use, just open the cover plate, and close it after use to reduce odor diffusion.