Back to blog
Article

Prefabricated Frames for Factory Building Roofs

Admin September 18, 2026

Prefabricated frames for factory building roofs mainly include types such as prefabricated concrete roof trusses, roof prefabricated elevated slabs, and steel-frame lightweight panels. The following is a detailed introduction:

Prefabricated Concrete Roof Trusses

  • Prestressed Concrete Broken-Line Roof Truss: It has a broken-line shape, with the top chord being straight and the bottom chord being broken. This structure has reasonable force distribution and can fully utilize the properties of high-strength steel and concrete. It has high load-bearing capacity, good stiffness, and excellent crack resistance, making it especially suitable for factory buildings with large spans. The span range is typically between 15 meters and 30 meters, with a compressive strength of up to 100MPa, a fire rating of A1, a fire resistance limit of more than 2 hours, and a safety rating of Class II.
  • Prestressed Concrete Arch Roof Truss: It has an arch shape, with axial pressure being the main force and a relatively small bending moment. It has high material utilization and is relatively lightweight. It has good force-bearing performance, strong spanning ability, and an aesthetically pleasing appearance. However, its production and construction are relatively complex, the roof slope changes greatly, and it has high requirements for the adaptability of the roof panels. Its span is usually larger than that of the broken-line truss, reaching more than 30 meters or even 60 meters, and is suitable for large-span public buildings and industrial factory buildings with special requirements for the building appearance.
  • Prestressed Concrete Trapezoidal Roof Truss: It has a trapezoidal shape, with the top chord being straight and a relatively small slope. The roof structure is simple, facilitating the laying of waterproof membranes. The roof slope is gentle, making construction and waterproofing easy. However, its force-bearing performance is not as good as that of the broken-line and arch trusses, it is relatively heavy, and its economic efficiency is slightly lower. The span range is generally between 18 and 30 meters, and it is mostly used in buildings with strict requirements for the roof slope or as a combination of a roof truss and a skylight frame.

Roof Prefabricated Elevated Slabs

The prefabricated elevated slabs have dimensions of 600mm x 600mm x 50mm. The concrete strength grade is C30, and they are equipped with a bidirectional cold-drawn steel bar mesh with a spacing of 150mm and φ6 bars. Each corner of each slab has a 2mm chamfer. The matching prefabricated concrete piers have dimensions of 100mm x 100mm x 180mm. Each pier has a φ8 steel bar head reserved at its center, which is used to fit into the small groove reserved at the corner of the elevated slab to fix its position and prevent the slab from sliding. The concrete strength of the piers is also C30.

Steel-Frame Lightweight Panels

The product type is insulated roof panels, which have a wide range of applications, including rail transit, industrial factory buildings, sports venues, warehousing and logistics, and apartment floors. They have a special function, namely fire and explosion resistance, with a fire rating of ≥2 hours.