Specifications of Mobile Toilets in Factory Areas
The specifications of mobile toilets in factory areas vary depending on their types and usage scenarios. Common specifications are as follows:
I. Classification by Type
Single-Person Standard Type Length: 1.2 - 1.5 meters, Width: 0.8 - 1.0 meters, Height: 2.2 - 2.4 meters. This specification is suitable for corners of factory areas with limited space or temporary work sites, meeting the basic usage needs of a single person, with a compact structure and easy mobility.
Double-Person Standard Type Length: 1.8 - 2.2 meters, Width: 1.0 - 1.2 meters, Height: 2.2 - 2.4 meters. It is suitable for areas in factory areas with slightly higher foot traffic, such as workshop entrances or logistics corridors, accommodating two people simultaneously and improving usage efficiency.
Barrier-Free Type Length: 2.0 - 2.4 meters, Width: 1.2 - 1.5 meters, Height: 2.2 - 2.4 meters. Equipped with handrails, low-positioned sinks, and other facilities, the door width is designed to meet the requirements for wheelchair access (usually ≥0.9 meters), suitable for scenarios in factory areas with disabled employees or requiring barrier-free passage.
Luxury Type Length: 2.5 - 3.0 meters, Width: 1.5 - 2.0 meters, Height: 2.4 - 2.6 meters. It features a spacious interior and higher-grade decoration materials (such as anti-slip floor tiles and stainless steel sanitary ware), suitable for reception areas or high-end event venues in factory areas, enhancing the corporate image.
II. Classification by Specific Dimensions
- Single-Person Specifications: 1100×1100×2300mm, 1280×1280×2300mm, 1.2×1.6×2.9 meters (length×width×height).
- Double-Person Specifications: 1100×2100×2300mm, 1280×2400×2300mm.
- Triple-Person Specifications: 1100×3300×2300mm, 1200×3600×2300mm. These dimensions are primarily modular in design and can be combined or adjusted according to the actual needs of the factory area. Some manufacturers support customized production, such as lengthening or widening to accommodate special scenarios.
III. Adaptation to Special Needs If there are special needs in the factory area (such as transportation restrictions or insufficient space height), the height can be adjusted or the structure optimized in consultation with the manufacturer. For example, some mobile toilets reduce the overall height to below 2.0 meters by lowering the height of internal facilities or adopting a folding design, to adapt to use in low-rise factory buildings or underground spaces.
Summary: The selection of specifications for mobile toilets in factory areas should comprehensively consider factors such as the number of users, space conditions, barrier-free needs, and budget. For conventional scenarios, standard specifications can be prioritized, while for special needs, it is recommended to communicate with the manufacturer in advance for customized solutions.
