Duanzhou Container House Maintenance
Maintenance of container houses in Duanzhou should be carried out from multiple aspects such as electrical safety, structural maintenance, and daily inspections, as detailed below:
Electrical Safety: After leaving the house each time, be sure to cut off all power supplies. It is strictly prohibited to use high-power or non-compliant electrical appliances to avoid safety accidents caused by circuit overload. Meanwhile, the wires inside the container house should not be directly tied to the steel structure but should be installed with wire conduits or troughs for isolation to prevent short circuits or electric leakage.
Structural Maintenance: After the installation is complete, users are not allowed to modify the structure without authorization, dismantle any bolt components, or add or remove partition walls. If modifications are required, they should contact the merchant. Light steel structural components should be regularly painted for maintenance. It is recommended to perform maintenance once every 1 - 2 years, and the steel structure should also be painted for maintenance after about 3 years of use to maintain aesthetics and extend the service life of the steel structure.
Daily Inspections: Regularly inspect the container house, including the connections of the steel structure, the sealing of doors and windows, and the waterproof layer. If any looseness, damage, or water leakage is found, contact professional personnel for repair in a timely manner. At the same time, regularly check the exterior of the container for rust or paint peeling. If found, remove the rust and repaint in a timely manner. Regularly check the wires for aging or damage and whether the sockets and switches are working properly.
Waterproofing and Moisture Prevention: The roof, walls, and other positions of the container house should be properly waterproofed to prevent rainwater leakage. Check the sealing strips around the roof and doors and windows, and replace them promptly if they are aged or damaged. In humid environments, regularly open the windows for ventilation to keep the interior dry and prevent mildew.
Cleaning and Maintenance: Regularly clean the interior and exterior of the container house to keep the environment clean. Use mild cleaning agents and avoid using highly corrosive chemicals. When cleaning the exterior walls of steel structure workshops, do not use abrasive cleaning products such as steel wool or scrubbing brushes. When using clean water, flush from top to bottom. Regularly perform concentrated cleaning inside the container, sweep and wipe the walls and floor of the container, and check for the presence of garbage or corrosive substances. If found, use reagents for neutralization reactions.
Other Aspects: Pay attention to safety issues such as fire prevention and theft prevention, and equip with necessary fire protection facilities such as fire extinguishers and smoke alarms. Ensure that the drainage pipes are unobstructed to prevent water accumulation from causing rust and decay at the bottom of the container. Be careful when moving around the house to prevent deformation of the container due to collisions. If the house is not in use for a long time, cover it with canvas, etc., to reduce dust and rain erosion. If scratches occur during use, use special repair reagents for repair to prevent corrosion.
