Dali Open-Air Mobile Toilet Specifications
The specifications of open-air mobile toilets in Dali vary depending on the type, with common specifications as follows:
Single-person type: The regular model typically has dimensions of 110cm in length, 110cm in width, and 230cm in height (there is also a saying that the length, width, and height are approximately 1.1m×1.1m×2.3m). It is suitable for single-person use and is commonly found in open-air settings such as ordinary parks, temporary construction site locations, and small event venues. The mini single-person model has dimensions of 100cm in length, 100cm in width, and 220cm in height, and is mostly used in open-air areas with dense crowds, such as small exhibitions and commercial streets. The basic single-toilet mobile public restroom usually occupies an area of about 1.2㎡ to 1.8㎡, with common internal clear dimensions of 1.2m to 1.5m in length × 1.0m to 1.2m in width, and a height generally ranging from 2.2m to 2.5m. This specification balances space utilization and portability, making it suitable for most public open-air venues.
Double-person type: It typically has dimensions of 180cm in length, 110cm in width, and 230cm in height, and can accommodate two people simultaneously. It is suitable for open-air settings such as team-building venues and outdoor camping areas where multiple people need to use the toilet at the same time. There is also a saying that the length of the double-person shared model will increase to about 2.5m, with the width remaining at 1.1m and the height still around 2.3m. This specification is suitable for large open-air event venues that need to accommodate multiple people simultaneously.
Barrier-free type: It is larger in size, generally with dimensions of 180cm in length, 150cm in width, and 240cm in height (there is also a saying of 1.5m×1.8m×2.4m). It reserves space for wheelchair turning, facilitating use by people with mobility impairments. It is commonly found in open-air settings such as large parks and scenic spot entrances. Barrier-free toilet stalls must comply with the requirements of the "Barrier-Free Design Code", with internal clear dimensions of no less than 1.8m×1.4m. A barrier-free ramp with a width of more than 0.8m must be provided at the entrance, and sufficient space for wheelchair turning must be reserved inside the stall. It is specifically used in open-air settings such as scenic spots, large venues, and event sites that need to accommodate special needs.
Other types: The small portable folding model can be reduced in size to 1m×1m×2m, suitable for open-air settings with limited space or for temporary use only.
