Creative Mobile Toilet

There are a variety of creative mobile toilet cases. Here are several representative designs for you:

Making a Mobile Toilet Using a Water Storage Tank

A young man used an idle water storage tank at home to create a mobile toilet. First, he split the water storage tank in half lengthwise and fixed universal wheels at the four corners of a wooden board for easy mobility. Then, he used wooden strips and self-tapping screws to increase the height of the tank. He cut an opening on the side of the tank, installed sponge strips to form a door frame, inserted plastic soft boards to create raised walls, placed the upper half on top of the wooden strips as a roof, and painted it with white waterproof paint to enhance its appearance. For the simple door, he pieced together waste honeycomb wooden boards with foam strips. He cut a hole at the bottom of the tank to install a drain pipe as a floor drain, and cut holes on the side and bottom to install direct connectors, then placed a plastic bucket to form a small water storage device. He connected a water pipe-made bath heater, installed a tee under the water inlet pipe and connected a showerhead, placed a toilet and installed a water tank, fixing them with glass glue. He connected the drain pipe to the sewage tank, horizontally connected a water pipe from the tee of the outlet pipe to the doorway as the water inlet pipe for the sink, and cut holes in the door to install connectors. This design makes full use of the space in the water storage tank and achieves the basic functions of a toilet through clever modifications. It is mobile and suitable for temporary venues or places with limited space.

Building a Mobile Toilet Using Two Chemical Tanks

This design involves finding two large chemical tanks. First, the steel bars on top are removed, and the plastic tank lids are completely cut off using a cutting machine. Then, the two plastic tanks are placed upside down together, and upper and lower iron frames are fixed. An opening the size of a door frame is cut on one side, and the inner plastic tank is also cut accordingly. Rectangular iron sheets are found and fixed with screws at the gaps between the two plastic tanks. Holes are cut at the corners of the plastic tanks to install PVC pipes, which are then sealed with sealant, and the excess PVC pipes are cut off. A toilet is placed and a water tank is installed, fixed with glue. The water inlet pipe and sink are connected and installed. A showerhead made of PVC pipes is connected and installed. Two wooden doors are installed using hinges and handles are attached. The water inlet pipe is extended and connected, and the water pipes are laid flat to the bottom of the plastic tanks. Finally, each function is tested, and the drain pipe and septic tank are connected. This design utilizes the sturdiness of chemical tanks to create a relatively fully functional mobile toilet, suitable for outdoor activities or construction sites.

Building a Super-Mini Mobile Public Toilet Using Building Blocks

This design continues the cyberpunk style, full of a sense of technology. Although the specific construction details are not elaborated, it can be imagined that through the combination of building blocks of different shapes and colors, a uniquely shaped and futuristic mini public toilet can be created. This creative design is not only ornamental but also inspires innovative thinking in mobile toilet design.