Cost per Square Meter of Prefabricated House

The cost per square meter of a prefabricated house varies significantly due to multiple factors, typically ranging from 220 yuan to 1000 yuan. The specific cost needs to be comprehensively evaluated based on the structural type, configuration standards, and construction scope. Here is a detailed analysis:

I. Basic Cost Range
The basic cost of a cement prefabricated house can be divided into two stages: factory production and on-site installation. The factory production phase includes costs for raw materials, processing, and quality inspection, with a price range of 220 yuan to 250 yuan per square meter. After transportation to the construction site, lifting equipment is required to install the prefabricated components at predetermined positions, with this phase costing approximately 50 yuan per square meter. Therefore, the basic cost, including only production and installation, is approximately 270 yuan to 300 yuan per square meter.

II. Differences in Full-Package Costs
In rural areas of Henan, the full-package cost of a prefabricated house with a full reinforced concrete structure (including lifting, foundation construction, etc.) is slightly over 300 yuan per square meter. However, it should be noted that this price usually represents a rough-finished standard, meaning only the main structure is completed, excluding interior decoration and supporting facilities. If advanced configurations such as photovoltaic power generation systems are added, an additional 50 yuan to 100 yuan per square meter is required, primarily for equipment procurement and installation.

III. Impact of Decoration on Costs
If decoration works such as water and electricity installation, wall and floor treatments are included in the cost scope, the cost will increase significantly. According to market research, the cost per square meter of a prefabricated house with basic decoration can reach 800 yuan to 1000 yuan. This difference mainly stems from the choice of decoration materials (e.g., the price difference between ordinary paint and environmentally friendly materials), the complexity of construction techniques (e.g., the cost gap between simple wiring and intelligent systems), and fluctuations in regional labor costs.

IV. Core Factors Influencing Cost Fluctuations

1. Structural Type: A full reinforced concrete structure has a higher cost than an ordinary cement prefabricated house due to its solid material usage and strong earthquake resistance;
2. Configuration Standards: Additional functions such as photovoltaic power generation and intelligent security systems directly drive up costs;
3. Construction Scope: The price difference between rough-finished and fully decorated delivery can be several times;
4. Regional Differences: Transportation distance, labor costs, and policy subsidies (e.g., rural housing construction subsidies) affect the final quotation.

It is recommended to clarify the construction scope and configuration standards based on actual needs and select the most cost-effective plan through multiple comparisons.