Introduction to the Main Features of New-Type Construction Container Prefab Houses

Today, container mobile houses stand out for high efficiency, low cost, and fast installation. They have become a preferred option for many development zones, real estate projects, tourist areas, and new rural construction programs, and a highlight of new materials and building practice this century. Container house makers note that these mobile homes are light in weight, occupy little land, and offer a practical service life. Their thermal performance is good: exterior walls use polystyrene-bead cladding with strong insulation and soundproofing, at low cost, making them a green, environmentally friendly form of housing. By contrast, masonry construction is less eco-friendly, because heavy use of clay damages ecosystems and reduces farmland. Advances and wider use of prefabricated housing are therefore a long-term trend. They can change traditional building models, lower living costs, improve the living environment, and reduce everyday housing pressure. They also make a meaningful contribution to environmental protection and align with national sustainable development strategies. How should mobile rooms be cleaned? Container house manufacturers advise as follows: Cleaning a container mobile house is a skill, not just washing. Mobile rooms are relatively easy to clean, and the process is not complicated. For cleaning and disinfection, steam cleaning of prefabricated panel houses mainly uses high temperature to remove grease and disinfect. Take care to protect against high-temperature injury. First, protect people. Steam cleaning should begin only after dust has been removed. How should staff clean and disinfect, and what must they watch for? Container house manufacturers remind you: Operators who disinfect prefabricated panel houses must hold valid work credentials. Cleaning and disinfection of the house, and the tools used, must meet the relevant requirements. Personal protective equipment must comply with applicable PPE standards. Isolate the work area with barrier tape, warn others, and post warning signs. In addition, manufacturers should match the process to the panel house materials and customer requirements, and carefully control steam pressure selection, tank temperature, and cleaning time. Mobile sterilization is quite straightforward.