Container House Liuhe

There are professional container house manufacturers in Liuhe District, Nanjing, such as Nanjing Zhongkai Container Technology Co., Ltd.. Here is a detailed introduction to container houses:

I. Classification and Uses of Container Houses Container houses can be classified by function into accommodation, office, commercial service, sanitary, and special-purpose types (such as medical and explosion-proof containers). By structural origin, they are divided into custom fixed-box modules (with a high degree of factory production) and variable-box modules (such as display boxes with flippable wall panels). By spatial combination, they can be single-box landings (temporary dormitories), horizontal container combinations (conference rooms), vertical stacking (multi-story dormitories), and staggered/cantilevered structures (popular guesthouses).

II. Technical Standards for Container Houses

1. Structural Safety: They must comply with the Technical Regulations for Modular Combined Houses, with a maximum of 6 floors, a height of ≤24 meters, and an earthquake resistance of ≤8 degrees. Corner fittings are the only stacking load-bearing points. Steel must be welded weather-resistant steel (GB/T 4171), and non-box components should use Q235B/Q345B.
2. Fire Prevention and Corrosion Resistance: Enclosure fillings must not use flammable materials like EPS. Crowded places require A-grade rock wool/glass wool with a fire resistance limit of ≥0.5 hours.
3. Environmental Requirements: Sandwich panel cores must be A-grade non-combustible materials (rock wool or glass wool). The use of EPS polystyrene foam is prohibited, and material environmental certificates must be provided.

III. Customization and Purchase Considerations

1. Size Specifications: The mainstream options are 20-foot (6058×2438×2591mm) or 40-foot (12192×2438×2591mm) standard containers, with non-standard customization also available (e.g., 3m×6m).
2. Structural Safety: Choose containers with fixed devices at the bottom, column wall thickness ≥2.3mm, and fully welded frames that meet the JGJ/T 435-2018 load standard.
3. Material Verification: Prioritize manufacturers with fire safety test reports and after-sales support, avoiding low-cost options with reduced configurations (such as thin-walled steel or non-fireproof cores).
4. Contract Details: Clearly specify dimensions (length, width, height), steel/wall material thickness, door and window opening directions, electrical configurations, and interior decoration requirements.