Back to blog
Article

Container House Construction Guide

Admin September 15, 2026

Constructing a container house involves steps such as selection, ground preparation, lifting and positioning, and interior modification and decoration. Here are the specific operations:

Selection Phase

Pay attention to the structural type of the container house. Common types include welded integral containers and bolt-connected modular containers. Welded containers are formed by factory-based integral welding, with a direct force path and strong resistance to deformation, making them suitable for frequent lifting and relocation. Modular containers are connected using standard plates with bolts, resulting in multiple connection nodes in the force path. When selecting, check the steel wall thickness of the columns and bottom beams, with common specifications ranging from 1.5 mm to 3 mm. Thicker walls provide greater load-bearing redundancy but also increase the self-weight. Additionally, pay attention to the coating process on the container surface. In areas with large temperature differences between day and night and significant humidity changes, hot-dip galvanizing offers a longer corrosion-resistant lifespan than cold-dip galvanizing.

Ground Preparation

Provide a uniform load-bearing foundation for the container house. First, remove loose soil and debris from the ground and compact the original soil layer. For long-term fixed use, pour a concrete strip foundation with a recommended width of 30 cm to 50 cm and a depth determined by the local frost depth. The top surface of the foundation should be level, with a height difference not exceeding 5 mm. For short-term use scenarios, use precast concrete pads or steel plates, with a pad spacing not exceeding 2 m. Each pad should have a crushed stone leveling layer beneath it.

Lifting and Positioning

Precisely control the contact state between the container and the foundation. Container houses typically have four or six lifting points at the bottom. Use steel wire ropes with sufficient load-bearing capacity during lifting and ensure that all lifting points are subjected to force simultaneously. After the container is positioned, immediately check the fit between the bottom beam and the foundation pads. If there is local suspension, use thin steel sheets to pad it solidly. Use a level to measure along the longitudinal and transverse directions of the bottom beam, with a levelness error controlled within 2 mm per meter.

Interior Modification and Decoration

This includes opening door and window openings, connecting and打通 (Note: '打通' here means 'connecting through' or '打通两个箱体' means 'connecting two containers through', you may need to adjust the translation based on the actual context, here it's translated as 'connecting two containers') two containers, installing interior wooden frames (including partition walls) and insulation layers, installing doors, windows, and lights, and installing real fireplaces. Personalized designs can also be implemented based on needs, such as installing folding beds and tables to enhance space flexibility, installing large floor-to-ceiling windows and roof skylights to improve lighting, and ensuring proper interior insulation for walls and roofs.