Installation Diagram of Portable Toilets at Construction Sites

Currently, there is no specific installation diagram for portable toilets at construction sites, but installation key points can be provided based on relevant descriptions.

Installation Key Points for Square-tube Box Toilets

• Overall Frame Construction: For a square-tube box toilet that is 3 meters wide and 6 meters long, its overall frame is welded using 10*10 square tubes with a thickness of 1.5. During the welding process, ensure that the connections between the square tubes are firm to guarantee the stability of the frame, enabling it to withstand certain external impacts and long-term use.
• Toilet Layout: The left side of this toilet is designated as the men's toilet, and the right side as the women's toilet. During installation, accurately divide the areas according to the design plan and reasonably arrange each functional area, such as the urinal area and the toilet area, to ensure rational space utilization and convenience for users.
• Door and Window Installation: Use special doors for container houses. When installing the doors, ensure that they open and close smoothly, the gaps between the door frames and the doors are even, and the sealing is good to prevent the emission of odors. Also, pay attention to the installation direction of the doors to conform to usage habits.
• Hand-washing Facility Installation: Equip with ceramic hand-washing basins. During installation, ensure that the basins are firmly fixed and closely connected to the walls or countertops to prevent water leakage. The installation position of the faucets should be appropriate for easy use by people, and the water flow should be smooth.
• Floor Laying: Lay anti-slip floor rubber on the entire floor. Before laying, ensure that the floor is flat, dry, and clean. When laying, pay attention to the tight splicing of the floor rubber to avoid gaps and prevent people from slipping.

Installation Key Points for Stainless Steel Waterless Packing Squat Toilets

• Installation Method Selection: Stainless steel waterless packing squat toilets have two installation methods: floor-mounted and in-ground. Choose the appropriate installation method according to actual needs and site conditions.
• Waterproofing for In-ground Models: If choosing the in-ground model, be sure to do a good job of waterproofing. After digging a pit in the ground, apply waterproof coating on the bottom and walls of the pit to ensure good waterproofing and prevent sewage from leaking into the ground.
• Floor Leveling: Regardless of the installation method used, the floor must be leveled. An uneven floor will lead to unstable installation of the squat toilet and affect its usability. Tools such as spirit levels can be used for detection and adjustment.
• Fixed Installation: During installation, use a fixed steel frame with rubber pads. Place the squat toilet on the steel frame, adjust its level, and ensure that the squat toilet is installed stably. Do not directly attach the stainless steel shell to the cement to avoid affecting its service life and appearance.