Back to blog
Article

Void Design in Concrete Prefabricated Houses

Admin September 18, 2026

The void design in concrete prefabricated houses has specific engineering application cases, but it requires comprehensive consideration of structural, functional, and construction factors.

I. Engineering Application Cases

A commercial complex renovation project with a void area adopted prefabricated assembly construction techniques, with a core structure comprising a combination of prefabricated hollow floor slabs (120mm thick) and prefabricated composite beams (spanning 8.5m). The void area has a bottom elevation of 4.5m and a top elevation of 17.8m, with structural support provided by post-tensioned prefabricated beams and composite floor slabs. Prefabricated beams with spans exceeding 8m need to be cambered at a ratio of 1/1000 of the span to counteract deflection deformation under long-term loads and ensure structural safety.

II. Design Characteristics and Functional Impacts

  1. Space Optimization: The void structure creates a vertically continuous space by breaking through floor slabs, significantly improving lighting and ventilation efficiency while enhancing spatial hierarchy, suitable for public areas such as lobbies and atriums.
  2. Area Sacrifice: Void design permanently occupies the usable area of the corresponding region on the second floor (e.g., bedrooms or studies), necessitating a trade-off based on functional requirements.
  3. Energy Consumption Issues: The physical properties of heat accumulation at the top in winter and cold air rising in summer can lead to increased energy consumption, requiring mitigation through thermal insulation design (e.g., double-glazed windows, wall insulation layers) or intelligent temperature control systems.
  4. Structural Reinforcement: Void areas impose higher structural load-bearing requirements, necessitating reinforcement measures such as prestressed concrete and high-strength steel, along with rigorous calculation of load distribution to avoid local stress concentration.

III. Construction and Material Requirements

  1. Transportation and Storage: Prefabricated components (e.g., hollow floor slabs, composite beams) must be secured against slipping during transportation, with stacking height not exceeding 6 layers; thin-walled hollow pipes and other materials must be protected from crushing and sealed tightly to prevent concrete leakage during pouring.
  2. Construction Precision: Installation of prefabricated components requires calibration using laser positioning or total stations to ensure flat joints and secure node connections, preventing cracking or water leakage later.
  3. Applicability to Rural Self-Built Houses: If the house area is small or the orientation dimensions are tight, void design may not be recommended due to its occupation of lighting surfaces, reduction in户型 (floor plan) utilization, and increased maintenance costs (e.g., thermal insulation, sound insulation), necessitating careful selection based on actual needs.

IV. Design Recommendations

Void design requires specialized calculations by structural engineers to ensure that the load-bearing capacity, deformation, and stability of prefabricated components meet regulatory requirements; it should also be comprehensively evaluated based on building function, climatic conditions, and economic efficiency to avoid blindly pursuing spatial effects while neglecting safety and practicality.