Chongqing Mobile Toilet Dry-Wet Partition

Key points for the design, procurement, and maintenance of dry-wet partitions in mobile toilets in Chongqing are as follows:

I. Common Design Methods The design of dry-wet partitions in mobile toilets should balance space utilization and practicality. A common solution is the combination of a semi-high water barrier + shower curtain. This involves setting up a water barrier about 10-15 centimeters high (usually made of stone or stainless steel) along the edge of the shower area, paired with a detachable shower curtain to achieve dry-wet separation. This design offers a strong sense of spatial transparency and is suitable for smaller mobile toilets. Additionally, the shower curtain can be regularly replaced to maintain hygiene. For more thorough dry-wet separation, a fully enclosed glass partition can be used, but attention must be paid to the load-bearing capacity and structural stability of the mobile toilet to prevent frame deformation due to the weight of the glass.

II. Local Procurement Channels Local enterprises in Chongqing can provide customized services. For example, manufacturers such as Chongqing Jingyu Furniture Co., Ltd. can produce partition products made of compact laminate, PVC panels, or metal materials according to the size and usage scenarios of mobile toilets. When procuring, it is essential to focus on confirming the following:

1. Material Corrosion Resistance: Given the humid environment of mobile toilets, it is crucial to choose materials that are moisture-proof and easy to clean (such as compact laminate).
2. Structural Stability: The partition frame should adopt a reinforced design to adapt to frequent movement or outdoor usage scenarios.
3. Ease of Installation: Prioritize modular designs for quick assembly, disassembly, and maintenance.

III. Maintenance and Repair Points A common fault of dry-wet partitions is blackening and cracking at the bottom, often caused by long-term water accumulation leading to material corrosion or sealant aging. Repairs should include:

1. Thoroughly Cleaning Accumulated Water: Check if the drainage system is unobstructed to prevent long-term soaking of the partition bottom.
2. Replacing Sealing Materials: Remove old sealant from cracked areas and refill with waterproof sealant (such as silicone sealant).
3. Reinforcing the Structure: If the frame is loose, tighten screws or replace connectors to prevent partition tilting.

IV. Special Considerations for Mobile Toilets Since mobile toilets need to be frequently moved or used outdoors, partition design requires additional attention to the following:

• Lightweight: While ensuring strength, minimize material weight as much as possible to reduce transportation costs.
• Windproof Design: When used outdoors, glass partitions should be equipped with limit devices to prevent damage from strong winds.
• Quick Assembly and Disassembly: Use snap-fit or bolt connections to reduce on-site welding or gluing processes and improve efficiency.

For further information on specific manufacturers or product parameters, it is recommended to contact local suppliers for case references.