Chifeng No-Flush Mobile Toilet

Chifeng no-flush mobile toilets mainly come in two types: microbial degradation type and no-water-flush packing type. Here is a detailed introduction:

Microbial Degradation Type

• Product Features: This type of toilet uses microorganisms for degradation. During operation, there is no odor produced. It does not require connection to water supply and drainage pipes, and basically no pollutants are discharged. It is lightweight and easy to move. It can break free from water source limitations and does not require emptying, greatly facilitating the daily management of administrators. It has a high technological content, does not require frequent maintenance, and has a long collection and transportation cycle. It can operate in a wide range of environmental temperatures, from -30 degrees Celsius to 50 degrees Celsius.
• Working Principle: The entire operation process is automatically completed under the control of a microcomputer, which can decompose human excreta into clean carbon dioxide gas and water molecules within 3 - 5 hours.
• Applicable Scenarios: It is suitable for a variety of places, including rural households, nursing homes, scenic spots, schools, border posts, recreational vehicles, tower cranes, conference venues, and various public places.

No-Water-Flush Packing Type

• Product Features: It does not require connection to a water pipe for flushing. It completes the collection and packaging of excreta through a specific mechanical structure, making it suitable for places with scarce water resources or where it is inconvenient to lay pipes.
• Working Principle: The system achieves its basic functions through a three-layer structure. The outermost layer is a protective casing, the middle layer is a transmission mechanism, and the inner layer is a contact layer. After the user finishes using the toilet and triggers the starting device, the drive shaft rotates the film roll by a fixed angle, and the heat-sealing device presses the edges of the film to form an independent sealed unit. The entire process lasts about six seconds.
• Installation Conditions: The ground needs to be a flat and sturdy cement base with a minimum load-bearing capacity of over 200 kilograms. For indoor installation, the clear height should be no less than 2.3 meters, and for outdoor installation, a rain-proof canopy is required. The power supply should use a standard civilian circuit with a voltage of 220 volts and a power of no more than 100 watts. For places without a power supply, a manual model can be selected. The installation location should reserve a maintenance passage, and it is recommended that the width of the front passage be kept at over 90 centimeters. The normal operating environmental temperature is from -10 degrees Celsius to 40 degrees Celsius. When used in extremely cold regions, insulation layers need to be added to the base.
• Daily Maintenance: Transmission components need to be lubricated with a special lubricant every month. The coaxiality of the reel device should be checked every 3,000 uses. When replacing the film, pay attention to distinguishing the material specifications. For cleaning the outer casing, a neutral detergent is recommended. The tightness of the fixing bolts should be checked every month.
• Usage Precautions: Before use, confirm that the ready indicator light is normal. Operate the device according to the specified procedures. Children should be accompanied by adults when using it. If the mechanism gets stuck, stop using it immediately and contact maintenance personnel. When the collection bag full indicator light comes on, complete the cleaning within two days.