How to Install a Mobile Cat Litter Toilet

The installation steps for the Xiaopei Intelligent Automatic Mobile Cat Litter Toilet vary depending on the model. Here are the installation methods for common models:

Xiaopei Intelligent Automatic Cat Toilet MAX 2

1. Waste Collection Box Installation: Open the latch to the right and pull out the waste collection box. Open the top cover to remove the accessories. Place a garbage bag inside the waste collection box, ensuring the bottom fits snugly. Close the top cover, place the N50 in the groove, and press down firmly. Reinstall the box into the machine and close the latch.
2. Power Connection: Connect the power adapter to the power source. Place the machine on a flat, hard surface, keeping it 5-10cm away from the wall.
3. Cat Litter Addition: After turning on the machine, press the menu button to switch to 'Maintenance Mode'. Press the OK button to rotate the drum until the opening faces upwards. Pour in the cat litter, then switch back to 'Smooth Cat Litter Mode' for the device to automatically level the litter.
4. APP Binding: Open the 'Xiaopei Pet' App, select the corresponding model, enter a valid Wi-Fi network and password to complete the binding. You can customize the device name.
5. Deodorizer Installation: Remove the back cover, insert the cotton swab vertically into the deodorizing liquid bottle, and tighten it. Insert the battery, and the device will automatically turn on. Fix the external bracket to the deodorizer's reserved slot, unscrew the original side cover, slide the deodorizer into the new side cover's clip, and rotate it until the solid dot aligns for proper installation. Finally, bind the deodorizer on the device's homepage.

Xiaopei Intelligent Automatic Cat Toilet MAX PRO Visual Edition

1. Waste Collection Bin Installation: Open the bin door by掰开 (掰开 means '掰开' or 'open by掰开', but for clarity, we can use '掰开 the latch' or simply 'open') the latch. Press the button behind the handle to release the spring and pull out the waste collection bin. Lay the garbage bag flat, fold it along the dotted lines, thread the drawstring through the 'Y-shaped slot', close the top cover ensuring the buckle does not press on the drawstring, reinstall the bin, and close the door tightly.
2. Deodorizer Installation: Remove the magnetic side cover upwards and place the deodorizing cube N60 into the deodorizer.
3. Device Placement and Power Connection: Lift the front of the device and place it on a flat surface, keeping it 5-10cm away from the wall. Connect the power adapter.
4. Cat Litter Addition: Enter 'Maintenance Mode' to rotate the drum until the opening faces upwards. Pour in the cat litter, then press the OK button to exit. The device will automatically level the litter. Note that the amount should not exceed the MAX line.
5. APP Binding: Select the corresponding model in the App, switch to 'Network Configuration Mode', and enter the Wi-Fi information to complete the binding.

General Simple Installation Steps (Based on User Experience)

1. Accessory Preparation: Check that the package includes a power adapter, garbage bags, instruction manual, etc. Prepare bentonite cat litter on your own.
2. Garbage Bag Installation: Place a garbage bag inside the waste collection box or bin, ensuring it fits snugly without wrinkles.
3. Cat Litter Addition: Pour in the cat litter until it is below the silicone indicator line at the bottom.
4. Power Connection: Plug in the power and press the multifunction button at the bottom. The screen will display 'go' when the device is operating normally.