Can the Bottom of the Toilet Be Moved?

Whether the bottom of the toilet can be moved depends on the situation, and the feasibility and operation methods vary significantly in different scenarios.

1. Moving the Toilet Bowl: Choose a plan based on distance and conditions
Moving the toilet bowl is a common need in home renovations, but its feasibility is limited by the moving distance, pipeline conditions, and construction conditions.

• Short-distance moving (within 15 cm): A special moving device can be used to achieve horizontal adjustment by extending the drainage pipe. This type of moving device is easy to install and has a relatively low cost, suitable for minor adjustments to the bathroom layout. However, attention should be paid to the connection and sealing between the moving device and the original drainage pipe to avoid leakage.
• Long-distance moving (over 30 cm): The ground needs to be chiseled out again, and the drainage pipe needs to be rearranged to the new position. This plan involves complex construction, may damage the building structure (such as the floor slab), and requires consideration of the drainage slope (usually ≥2%) to ensure smooth drainage. If upward moving (such as raising the ground) is involved, poor slope can easily lead to poor drainage and even blockage, so horizontal moving is the mainstream choice.
• Pipeline condition limitations: If the original drainage pipe is a cast iron pipe, the renovation is more difficult; if it is a PVC pipe, it is easier to construct. In addition, after moving, a closed-water test is required to verify the waterproof performance and avoid leakage later.

2. Mobile Toilets: Rely on hoisting or handling for position adjustment
Mobile toilets (such as temporary toilets in public places) adopt a frame structure, with the bottom welded from channel steel or I-beams and the columns made of square steel, forming a hoistable frame as a whole. Their “movability” is not achieved through their own power but through external equipment (such as forklifts and cranes) for handling or hoisting. These toilets are suitable for temporary events, construction sites, and other scenarios, but when used for long-term fixation, the stability of the foundation and drainage connections need to be considered.

3. Squat Toilet Renovation: No need to move the bottom structure
If you need to change a squat toilet to a toilet bowl, you can use a “squat-to-sit” chair. This tool is equipped with adjustable supports at the bottom, which can adapt to squat toilets of different sizes and be directly placed over the original squat toilet without damaging the ground or moving the bottom structure of the toilet. This plan has a low cost and fast construction, but attention should be paid to the anti-slip treatment between the chair and the ground to avoid safety hazards during use.