Introduction to Bus Mobile Toilets

A bus mobile toilet is a facility that can be moved as a whole, providing temporary or fixed toilet services to the public. It is suitable for places such as stations, tourist attractions, and construction sites.

Dimensions and Facility Configuration

The bus mobile toilet is 10.9 meters long and adopts a bubble-sealed high-pressure water-saving flushing system, which can significantly reduce water consumption. The interior space is divided by gender: the men's toilet has 3 sitting toilet stalls and 2 urinal stalls, while the women's toilet has 5 sitting toilet stalls, all equipped with 1 sink. The ventilation design includes ventilation windows and a fresh air system, and an emergency call button is installed for safety.

Types and Core Parameters

There are two types based on the treatment method:

1. Flush Type: It relies on the capacity of the water tank and the sewage tank. The water tank usually has a capacity of 200-300 liters, and the sewage tank has a capacity of 300-400 liters. The sewage tank needs to be cleaned regularly.
2. Waterless Packing Type: It does not require a water source or sewage pipes. It collects excrement through biodegradable packing bags. Each roll of packing bags can handle 100-150 uses, making it suitable for scenarios with water shortages or no sewage disposal conditions.

Power Supply Options

The power supply plan should be determined according to the usage scenario:

• For short-distance or fixed locations, it can rely on the vehicle's battery or an external mains power supply.
• For long-distance or temporary events, it is recommended to choose a built-in generator or a high-capacity battery (such as 12V 200Ah or above) to ensure continuous power supply.

Structural Design and Hygiene Standards

1. Floor Treatment: Anti-slip floor materials are used, and the floor is set with a slope of not less than 1% towards the drain to prevent water accumulation.
2. Ventilation System: The top has natural ventilation openings combined with side forced air exchangers. The air exchanger should have a airflow rate of more than 30 cubic meters per hour to effectively control odors.
3. Material Selection: The inner wall panels are made of anti-corrosion and easy-to-clean HDPE (high-density polyethylene) material, reducing maintenance costs.

Applicable Scenarios

It covers densely populated public areas and places with temporary needs, including stations, docks, tourist attractions, villa areas, newly built residential areas, large construction sites, squares, and bustling commercial streets. Its mobility allows it to quickly respond to the sanitation needs of temporary events (such as exhibitions and music festivals) and can also serve as a fixed facility to supplement the existing public toilet network.