Beihai Outdoor Mobile Toilet Specifications
The specifications of outdoor mobile toilets in Beihai vary depending on the type, with common specifications as follows:
Single-person mobile toilets: The standard model typically has dimensions of 110cm in length, 110cm in width, and 230cm in height, approximately 1.1m×1.1m×2.3m. It is suitable for single-person use and is commonly found in ordinary parks, temporary construction sites, and small event venues. The mini single-person model measures 100cm in length, 100cm in width, and 220cm in height, and is often used in crowded areas such as small exhibitions and commercial streets. Some information indicates that single-stall mobile public toilets usually occupy an area of about 1.2㎡ - 1.8㎡, with internal clear dimensions commonly ranging from 1.2m - 1.5m in length, 1.0m - 1.2m in width, and a height generally between 2.2m - 2.5m, suitable for most moderately crowded scenarios such as temporary exhibitions and outdoor markets.
Double-person mobile toilets: These typically measure 180cm in length, 110cm in width, and 230cm in height, allowing two people to use them simultaneously. They are suitable for team-building venues, outdoor camping areas, and other scenarios requiring simultaneous toilet use by multiple people. Some sources suggest that the length of double-occupancy models may increase to about 2.5m, with a width of 1.1m and a height of approximately 2.3m, suitable for large event venues requiring simultaneous use by multiple people. For multi-stall mobile public toilets, taking double-stall models as an example, they occupy an area of about 3㎡ - 4㎡; for three stalls or more, the area increases based on the number, with each additional stall adding about 1.5㎡ - 2㎡ of usable area. The overall length is usually between 3m - 6m, and the width is typically 1.5m - 2.5m.
Barrier-free mobile toilets: These are larger in size, generally measuring 180cm in length, 150cm in width, and 240cm in height, with reserved space for wheelchair rotation, facilitating use by individuals with mobility impairments. They are commonly found in large parks and scenic area entrances. Some sources state that barrier-free mobile toilets may be wider and longer, typically measuring 1.5m×1.8m×2.4m, with reserved space for wheelchair entry and rotation, specifically designed for scenic areas, large venues, and event sites requiring accommodation of special needs. Moreover, barrier-free toilet stalls must comply with the requirements of the "Barrier-Free Design Code", with internal clear dimensions not less than 1.8m×1.4m, a barrier-free ramp wider than 0.8m at the entrance, and sufficient space reserved inside the stall for wheelchair rotation.
Small portable folding models: These can be reduced in size to 1m×1m×2m, suitable for scenarios with limited space or only requiring temporary use.
