Baicheng Foam Sealing Mobile Toilet
The Baicheng foam sealing mobile toilet is an environmentally friendly mobile toilet that utilizes foaming technology to achieve water and electricity conservation while efficiently eliminating odors. The following provides a detailed introduction in terms of its working principle, technical parameters, performance characteristics, operating costs, and applicable scope:
Working Principle: This toilet generates compressed air through a foaming device, which is then transmitted via a conveyor pipe to a foam activator. The emitted foam fills the toilet bowl through foam channels on the side walls of the toilet fixture, covering and cleaning the bowl. Simultaneously, the foam seals the sewage outlet of the toilet, effectively preventing the spread of odors. A weighted baffle is installed at the sewage outlet of the toilet fixture to prevent rapid foam loss and achieve secondary odor sealing. Under the lubricating effect and non-stick properties of the foam, waste slides down to the fecal storage tank or septic tank by gravity, eliminating the need for water flushing and replacing traditional water flushing methods with foam.
Technical Parameters: The power supply is AC220V/50HZ, VDC12/7.0A; the air pump power is only 5.6W (220V); the fecal storage tank capacity of a single toilet is 100L, which can store waste from 400 uses. If there is a fecal storage pool, the storage tank may not be necessary; the air pressure is 0.024Mpa; it is equipped with a 2-cubic-meter water tank, and the iron sheet is treated for corrosion and rust resistance.
Performance Characteristics: In terms of water conservation, the foam mixture expands nearly a thousand times in volume after foaming, with water consumption per use being less than 0.2 liters. For electricity conservation, the air compressor has low power, consuming less than 1 degree of electricity for 10 hours of continuous operation. Visually, the foam seals the toilet bowl, hiding waste from view. Olfactorily, both the foam and the sealing device effectively block odors. It is easy to install and has low operating costs. Foaming and sealing are automatically completed, making it easy to manage. It has strong resistance to shock loads and is suitable for densely used locations.
Operating Costs: Each toilet position consumes only 0.2 kilograms of concentrated foaming agent per day, costing approximately 0.8 - 1 yuan. This can ensure a continuous supply of foam for each toilet position for 24 hours a day, with a cost of about 0.02 yuan per use.
Applicable Scope: It is widely used in cities, squares, docks, stations, tourist attractions, trains, ships, hospitals, and other locations.
