Water Connection for American Mobile Toilets
The water connection methods for American mobile toilets vary depending on their types, mainly including ordinary plastic mobile toilets, high-end mobile toilets, and some mobile toilets equipped with time-delay valves.
For ordinary plastic mobile toilets, the water connection process requires tools such as water pipes, faucets, buckets, and water pumps. First, it is necessary to identify the water inlet points of the flush tank or hand-washing basin, which are crucial for water connection. Then, connect one end of the water pipe to the water inlet point and the other end to the water source, such as a faucet or a bucket (if using a water pump for pumping). During the connection process, ensure that the water pipe is tightly connected to prevent water leakage. After the connection is completed, turn on the water source and adjust the water flow to an appropriate range to meet the water needs of the mobile toilet. Finally, check all connection points for water leakage to ensure a smooth water connection process.
High-end mobile toilets, such as the WHITE WASH model launched by CALLAHEAD in New York, adopt a more advanced water supply system. These mobile toilets are equipped with an independent water and electricity circulation module, achieving water supply through an independent freshwater tank and a dual-pump independent pressure supply design. The freshwater tank stores clean water, and the dual pumps are responsible for pressurizing and delivering the water to various water consumption points, such as the flush tank and hand-washing basin. In addition, a dedicated water heater is installed below the sink to provide continuous hot water, meeting users' water needs in different seasons. This water supply method is not only convenient and fast but also more environmentally friendly and energy-efficient.
Some mobile toilets use a time-delay valve to directly connect to the tap water pipe. These mobile toilets control the opening and closing of the time-delay valve through a lever or foot switch to achieve automatic flushing. After the user finishes using it, simply gently pull the lever or step on the foot switch, and the time-delay valve will automatically open, introducing water from the tap water pipe into the flush tank for flushing. This method does not require additional water connection tools and is easy to operate, making it suitable for occasions with high requirements for water convenience.
